2500mm, 3000mm, 3500mm, 4000mm, 5000mm, 6000mm
Self Supported Edge Bars
The Self Supported Edge Bars are used for glazing canopies, carports and lean-to roofs and for finishing the roof either side.
When used in conjunction with eaves beams and wall plates, they make a suitable option for creating or replacing a lean-to conservatory roof, canopy or carport.
They are compatible with the 16mm and 25mm polycarbonate sheets and are supplied with one end cap.
Available in white and brown and various lengths.
Please Note: Self Supported Edge Bars do not need to have a rafter beneath them and are only really suited to experienced DIY’ers or tradesmen.
Loading specifications apply and these bars have limitations so you need to ensure that you know the maximum glazing bar projection and sheet width before ordering.
Maximum projection of these bars when unsupported is 4000mm. Maximum polycarbonate width is 1000mm and maximum sealed unit width is 800mm.
Spans and maximum sheet widths do vary dependant on pitch and projection. Minimum pitch is 5 degrees, but 10 degrees is recommended.
The 2500mm edge bar is not compatible with sealed units. If this bar is to be used with glass, we recommend ordering a 3000mm bar and then cutting to your required size.
For all related accessories, click here.